Ideal for tubes from Ø 6 mm to Ø 35 mm. Great for reaching difficult spots.

Liquid cleaner for weldable metals composed of: 1 vertical dispenser in high density polyethylene, 1 pad in polyethylene with closed cells, white color, absorbing power 97%, 1 cap in high density polyethylene, 1  20ML bottle of FlashBK . The bottle is composed of a peg and a cap, all in PE and contains 20 ml of product.

Description

1) TWIST OFF  THE SAFETY CAP FROM THE BOTTLE
2) REMOVE THE PROTECTION TILE AND KEEP IT
3) INSERT THE O-RING GASKET INCLUDED AND  MAKE IT STICK  WELL TO THE BOTTLE NECK BASE
4) TIGHTEN THE APPLICATOR TO THE BOTTOM OF THE BOTTLE
5) EXERCISE A SLIGHT PRESSURE ON THE BOTTLE TO IMPREGNATE THE BUFFER

SPECIAL WARNINGS

For ferrous parts in the presence of rust:
We recommend a preliminary cleaning with abrasive material to completely remove the rust.
Clean with a rag and proceed to apply FlashBK

Removing grease or pollutants:
Clean the surface with absorbent paper or rag to ensure that FlashBK is evenly distributed.
Proceed to apply FlashBK

CORRECT STORING OF THE PRODUCT:
Store the product in a dry place, away from heat sources, in the dark. Do not subject to strong pressure.
After use, close the applicator with the supplied cap. Do not leave the applicator in the sun for a long time and at temperatures above 45 ° C. The same applies to top-ups. If you do not use the applicator for several days, remove the swab from the dispenser, wash it, dry it and replace it. Close with the supplied cap.

How to store the bottle
Replace the original peg and cap on the bottle and make sure it is perfectly closed.

PRODUCT SPECIFICATIONS:

state: liquid

appearance: yellow/green color

smell:  almond

water solubility: completely miscible

product expiration:  12 months if perfectly preserved ( from the opening date)

cleaning residue: none

working range °C  ( cleaning of the piece): from  -10°C   to    +60°C

evaporation time of the applied product: te 20°C=10sec    –   te ≤ 20°C = 5 sec

maximum protection time for the treated surfaces: 1.5/h  if the environment is not particularly humid or contaminated.

Operating temperature: from 450°C   to  800°C≤

Excellent for tubes from Ø 35 mm onwards. Ideal for flat and large surfaces.
Liquid cleaner for weldable metals composed of: 1 vertical dispenser in high density polyethylene, 1 closed cells polyethylene pad , white color, absorbing power 97%, 1 cap in high density polyethylene, 1  40 ml bottle of FlashBK . The bottle is composed of a closure cap, the whole is in PE and contains 40 ml of product.

ASSEMBLY INSTRUCTIONS
1) INSERT THE BUFFER ON THE APPLICATOR
2) DISCONNECT THE SAFETY CAP FROM THE BOTTLE
3) SCREW THE BOTTLE APPLICATOR TO THE BOTTOM
4) EXERCISE A SHORT PRESSURE ON THE BOTTLE TO IMPREGNATE THE BUFFER.

SPECIAL WARNINGS

For ferrous parts in the presence of rust:
We recommend a preliminary cleaning with abrasive material to completely remove the rust.
Clean with a rag and proceed to apply FlashBK

Removing grease or pollutants:
Clean the surface with absorbent paper or rag to ensure that FlashBK is evenly distributed.
Proceed to apply FlashBK

CORRECT PRODUCT CONSERVATION:
In a dry place, away from heat sources, in the dark. Do not put it to strong pressure.
After use, close the applicator with the supplied cap. Do not leave the applicator in the sun for a long time and at temperatures above 45 ° C. The same applies to top-ups. If you do not use the applicator for several days, remove the swab from the dispenser, wash it, dry it and replace it. Close with the supplied cap.

How to store the bottle:
Reposition the original cap on the bottle and make sure it is perfectly closed.

PRODUCT SPECIFICATIONS:

state: liquid

appearance: yellow/green color

smell:  almond

water solubility: completely miscible

product expiration:  12 months if perfectly preserved ( from the opening date)

cleaning residue: none

working range °C  ( cleaning of the piece): from  -10°C   to    +60°C

evaporation time of the applied product: te 20°C=10sec    –   te ≤ 20°C = 5 sec

maximum protection time for the treated surfaces: 1.5/h  if the environment is not particularly humid or contaminated.

Operating temperature: from 450°C   to  800°C≤

This applicator is ideal for cleaning sections from 6 to 28 mm.
Equipped with double tip. The chisel tip is suitable for cleaning the outside surfaces and the round tip facilitates deep cleaning of the inner surface.

Instructions for the Applicator
Before using the product, load the applicator: break the vial, remove the chisel tip only and pour the contents of the vial. Replace the tip and position the applicator horizontally for a few seconds before cleaning. Distribute the product on the surface to be cleaned by simple rubbing, without pressure. Use the chisel tip for the outside and the round tip for the inside of the part to be cleaned.

How to keep the applicator
The applicator is a tool. After use, place the tool perfectly sealed. After charging the product, charge as shown above.

Dispose as undifferentiated.

The tips are spare parts and should be replaced when they lose their original shape.

PRODUCT SPECIFICATIONS:

state: liquid

appearance: yellow/green color

smell:  almond

water solubility: completely miscible

product expiration:  12 months if perfectly preserved ( from the opening date)

cleaning residue: none

working range °C  ( cleaning of the piece): from  -10°C   to    +60°C

evaporation time of the applied product: te 20°C=10sec    –   te ≤ 20°C = 5 sec

maximum protection time for the treated surfaces: 1.5/h  if the environment is not particularly humid or contaminated.

Operating temperature: from 450°C   to  800°C≤